|
#1
|
||||
|
||||
I don't know much about them but check out fragbox, on their site it says they use them for their frag tanks. I think they sell some ontheir site as well.
|
#2
|
||||
|
||||
Id b interested in some feedback as well. Thinking about putting a fragbox halo on my biocube14. I saw them in action at an Ontario fragfest. Looked awesome! If they are dimmable then I'm likely sold.
|
#3
|
|||||
|
|||||
From what I have read and heard about all par38 bulbs, they can be dimmed with a standard house dimmer as they use a standard socket.
|
#4
|
|||||
|
|||||
Not all models were dimmable, but all the newer ones should be. I bought 4 of the rapid led ones and they are great.
http://www.reefsupplies.ca/online-store/PAR38/
__________________
They call it addiction for a reason... Last edited by FishyFishy!; 01-26-2015 at 03:57 AM. |
#5
|
||||
|
||||
Well I picked up a halo par 38 from a local reefer today. Set it up on the tank and wow! Talk about shimmer! I will defineately have to keep the tank topped off to avoid havin a seisure lol. I find it quite blue but I'm sure it's just that I'm not used to it. I snapped a before and after.
http://imgur.com/a/xTVXW It's actually not quite as blue as it shows on my iPhone but a drastic change none the less. I have to say it doesn't seem as bright even as the single 8w t5 that came in the stock hood, but I'm guessing that's cause it's more concentrated? Less light spillage? Will leave it on for a while and see how it goes. I will report back. |
#6
|
||||
|
||||
Also. The light I got is not dimmable with the Lurton dimmer I just bought from Home Depot. It just flashes when I move it from full power. The dimmer is supposed to be for cfl&led lights. Could be the wrong dimmer or could be an older model bulb. Either way on my 12.5x12.5x22" deep tank I don't think it needs to be dimmed.
|
#7
|
|||||
|
|||||
Quote:
__________________
Mike 77g sumpless SW DIY 10 watt multi-chip LED build http://www.canreef.com/vbulletin/showthread.php?t=82206 |