noob just beginning questions

[Slyguy00]

yea you can leave it in the rubber maids as long as you have flow in the water and temperature control.

[SaltyDog143]

Ok so I am gonna surmise here.......

Get a stand and sump,
next pumps and heaters
then go buy rock put it in the tank, fill it with RO water start circulating and bring up to temp
Install internal fans, current makers, whatever you call them to get water flow

bam, we have started

next get lights on the tank, then a skimmer and watch your tank start to evolve, slowly.......

am I starting to get the idea straight?
or am i still out to lunch

oh ya dont forget the salt, lol

Randy

[Slyguy00]

Almost got it lol. I wouldnt add the rock to RO water or you will kill whatever life is on it. Make your salt water, add it to the tank, then add rock. Then your rockin That is if you plan on using live rock anyway.

[SaltyDog143]

Yes live rock, but gonna do approx, 80/20 or 70/30 dry to live mix to start, like I said no rush and limited funds

[Slyguy00]

Thats always a good way to do it. Just don't add live rock to fresh water and you'll be good to go.

[Coralgurl]

I'd take the time to plan your stand and sump at this point. You can get a metal stand or make a wood one, either will work. But, how you plan your stand may limit the size of your sump. You'll want big enough to hold all your equipment (skimmer, heaters, reactors, etc.), plus any overflow from your tank.

Your stand/sump will also determine your skimmer, you'll need room to remove the skimmer for cleaning maintenance. I've run my tanks skimmerless, but mostly after the tanks have been established (running a year or more). I can't remove my skimmer body from my tank, so if anything happens to the skimmer, I have to drain the sump, and do whatever maintenance is required in the sump, or take it completely apart to remove. A bit of a pain!!

You are also going to need a return pump (didn't see that on your list), to get the water from the sump back to the tank).

Watch the forums for sales, shut downs etc., you can get everything you need to start at a fraction of what you pay retail. (Except for plumbing parts, you should buy new). Sounds like this is going to be a good build, nothing in this hobby happens fast, so continue to take your time, acquire the things you need.

When you are ready to buy and unsure if it's going to work, ask the questions. This is a good group of people here, ready and willing to help out. Remember there are a lot of different opinions, so take what you want and leave the rest.

Oh, and what are your plans for lighting??

Welcome aboard!!

[SaltyDog143]

I have no clue what I need for lighting just yet, we do want to do corals, some soft some hard, we plan on using the easy/beginner types that are easier to not kill, if you get my drift, we do want your typical clown fish, blennies, dragonettes, crabs, maybe an erchen one day? Honestly we are trying to keet it simple until we get to know what we are doing, would prefer led's so we don't have to buy another set of lights within a year.

thanks for the input everyone