Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Reef

Reply
 
Thread Tools Display Modes
  #1  
Old 09-17-2014, 04:31 AM
mihaivapler's Avatar
mihaivapler mihaivapler is offline
Member
 
Join Date: Feb 2013
Location: calgary
Posts: 94
mihaivapler is on a distinguished road
Default

Quote:
Originally Posted by mihaivapler View Post
it more likely from the self leveler,the dust from it..the self leveler contain some pretty nasty chemicals in it which in the moment when you start hammerit starts to get in the air and if you had the vent hole it might get in trough there and then combining with the water turns it in pure poison for you corals..the self leveler contains Ethylbenzene which is known to cause cancer and contains Butyl Benzyl Phthalate known tocause developmental reproductive toxicity..another component is the TITANIUM DIOXIDE which the same it might affected your water....probably the best solution would be to take all the corals out the water and the fish to and empty your tank and start it all over...the rock will contain all this substances to so a good bleach and cure of the rock would be necessary in order to get all the toxic chemicals out..
this is my advice as professional tile setter and fish keeper..
Found this data sheet for the self leveler..states clearly that affects the aquatic life.

Signal Word.............................................. ..... DANGER.
Hazard Classification.................................... . Skin Irritant 2. Eye Irritant 2. Skin Sensitizer 1. Reproductive 1B. Acute Toxicity 4. Aquatic
Chronic 1.
Hazard Description....................................... . H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes
serious eye irritation. H332 Harmful if inhaled. H360 May damage fertility or the unborn
child. H410 Very toxic to aquatic life with long lasting effects.

Underlayment Self-Leveling contains silica, crystalline
quartz; portland cement; calcium aluminate;
anhydrite; limestone, calcium carbonate; aluminum
oxide; limestone; gypsum

Last edited by mihaivapler; 09-17-2014 at 04:36 AM.
Reply With Quote
  #2  
Old 09-19-2014, 11:53 PM
hillegom hillegom is offline
Member
 
Join Date: Nov 2008
Location: Surrey
Posts: 1,998
hillegom is on a distinguished road
Default

Sorry to hear about all your problems. Hopefully it will turn around.
So is cutting new tile in the house a standard practice? I know there was a lot of dust made in the demolition, but to cut new tiles in the house to add to the mess doesn't seem right to me.
My neighbour redid his tile and they hung plastic around the job to try to contain the dust. Most of it, can never totally mask everything off. But when the new tiles were cut, they were cut outside.
Reply With Quote
  #3  
Old 09-20-2014, 12:07 AM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default

So sorry to read this
I hope you get things turned around
Reply With Quote
  #4  
Old 09-20-2014, 01:29 AM
mihaivapler's Avatar
mihaivapler mihaivapler is offline
Member
 
Join Date: Feb 2013
Location: calgary
Posts: 94
mihaivapler is on a distinguished road
Default

Quote:
Originally Posted by hillegom View Post
Sorry to hear about all your problems. Hopefully it will turn around.
So is cutting new tile in the house a standard practice? I know there was a lot of dust made in the demolition, but to cut new tiles in the house to add to the mess doesn't seem right to me.
My neighbour redid his tile and they hung plastic around the job to try to contain the dust. Most of it, can never totally mask everything off. But when the new tiles were cut, they were cut outside.
They should use a wet saw to cut the tiles and go outside for when they use the grinder. Unfortunately most of the trades they don't care about your house.they make it easier for them and not to protect your house..just sad for all..the tank was looking awesome lots of colonies....
Reply With Quote
  #5  
Old 09-20-2014, 04:01 AM
monza monza is offline
Member
 
Join Date: Apr 2003
Location: Cowtown
Posts: 679
monza is on a distinguished road
Default

Wow, your like the reef tank punching bag. Sorry for your issues.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 06:32 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.