![]() |
|
#1
|
||||
|
||||
![]() Running my tank now with just ro-di water trying to get my water level right so when I shut off the pump it doesn't overflow my sump. The herbie worked well really easy to tune little scary at first not knowing if I'm going to flood the up stairs and if the overflow could catch up. I still have to work on the mag 24 it's just growling away not sure if that's normal. The mag 18 I have is a lot quieter.
![]() |
#2
|
||||
|
||||
![]() |
#3
|
||||
|
||||
![]() I have to thank Eli at fijirock for the awesome aqua scape Eli is a pro hope no one has to compete against him at the fragfest. http://youtu.be/2WoBaVX_QDA
|
#4
|
||||
|
||||
![]() |
#5
|
||||
|
||||
![]() |
#6
|
||||
|
||||
![]() On my ro- di unit I shut valves and let it pressure up and back flush then opened valves back up now it's ready zero. I also checked it with hand held meter and it read zero so I'm not sure y it was reading 2 ppm
|
#7
|
||||
|
||||
![]() |
#8
|
||||
|
||||
![]() So today I was playing around with my apex neptune trying to program my jebao wave makers and lights but I'm not finding it very user friendly I thought it was going to be easier but maybe I just need more time with it. I also found the instruction cd manual to be all over the place and having to go back and forth trying to figure things out.
|
#9
|
||||
|
||||
![]() My tap water in Toronto has about 250 TDS. Yours seem very high.
|
#10
|
||||
|
||||
![]() It's because it's well water it actually goes over 1000 ppm my water is really soft and clear and no chlorine but was lab tested and it's all good.
|