|
|
|
|
|
#1
07-29-2014, 04:37 AM
|
||||
|
||||
I use a Fluke pen to test for A/C voltage on wires. It looks like an a fat plastic pen that just needs to be close to the current and then lights up if there is power there. I haven't tried it in water though and without purposely adding electricity to my tank I can't say for sure if it works. They are cheap and other companies besides Fluke make them. They come in handy for wall receptacles, testing extension cords, etc. If you know any electricians they would be likely to have one to try.
|
|
#2
07-29-2014, 04:57 AM
|
|||||
|
|||||
|
I would get a grounding probe. They are fairly cheap.
I had a similar problem turns out it was my skimmer pump cord. It was wearing.
__________________
I have a little tank and little fishes! Hmmm..... Fishies That is what I keep telling myself.
|
|
#4
07-29-2014, 05:28 AM
|
||||
|
||||
|
Get a cheap multi meter, stick the black end into the earth pole on a three prong plug, put the other end in the tank. Get a helper to unplug things one at a time, when the voltage drops to zero the last item unplugged is the culprit. Good luck.
Edit: When a heater went bad in my display I had the same shocking experience, I didn't notice any damage to the livestock in the tank. The fish were a bit skittish, but no harm done. The fish that were in there are still in there after about 2 years. Last edited by hillbillyreefer; 07-29-2014 at 05:31 AM.
|
|
#5
07-29-2014, 05:44 AM
|
|||||
|
|||||
|
holy frak! Glad to hear you're ok! Would hate for you to have yet another excuse not to finish your build.
All kidding aside, keeps us updated on what you find! You've got me scared to put my hand in my tank now!
|
|
#7
07-29-2014, 07:33 AM
|
|||||
|
|||||
|
I've often wondered why Neptune hasn't made some kind of voltage detector for the Apex. Or any other controller manufacturer...
Hmm.. maybe I should make something. It really is as simple as having a voltage meter in the water and then the other end to ground. It could monitor the voltage in your tank. FWIW you'll always get some stray voltage in the water. It is when it gets high that it is a problem. And yes - I know.. it is the current that kills you not the voltage... Either way - some way to indicate that it is safe for me to put my hand in the water. Glad you survived. The most I ever got was an uncomfortable tingling. Found the heater that was the culprit.
|
|
#8
07-29-2014, 02:06 PM
|
|||||
|
|||||
|
Quote:
LOL!!!! No excuse...YET. I'm still kickin! haha. After work today I'm going to take the heaters out, and inspect all the powerheads as well. See if I can find anything obvious.
__________________
 They call it addiction for a reason...
|
|
#9
07-29-2014, 04:20 PM
|
||||
|
||||
|
I would not recommend a grounding probe. A grounding probe might seem like a good idea to draw out voltage from the aquarium but it tends to draw more voltage into the aquarium that can lead HLLE and doesn't solve the issue of stray voltage in the aquarium. It is best to find out which piece of equipment is leaking voltage and replace. Just my 2 cents
|
|
#10
07-29-2014, 11:22 PM
|
||||
|
||||
|
Wow - that is a hazard of the hobby I had never considered! I am glad you are okay. I stick my hands in my water all the time without a second thought. while doing a water change on the weekend, I accidentally dumped a bunch of water on my power bar and it started hissing and spurting. If the toxins don't get us the electricity will!
|
Hybrid Mode
