Waveline DC12000

[daplatapus]

Originally Posted by sphelps

Any chance the overflow leak caused the controller failure?

No, they have a sump room in their basement. I mounted the controller and power supply on a concrete wall about 5' from any water source. It was definitely a controller fail first. Then the factory installed leaking overflow drained the tank down to the power head levels (which overflowed the sump) then the waves in the tank sloshed into the living room.

[sphelps]

OK I see what you meant, I thought the bulkhead or something was leaking and just happened to fall into the sump below.

[daplatapus]

Has anyone replaced their power supplies with after market power supplies? Or has everyone just gotten warranty replacements? I've contacted RLSS and they're willing to send a new controller once they get the required paper work, but I'm curious to see if anyone has gone other routes with theirs.

[monza]

Have not tried, or even looked at getting warranty yet.
Have not read anywhere of anyone doing another power supply.

[mark]

read where people have purchased another similar type (laptop) or gotten an external and used the cable from original

[sphelps]

I ran my multiple first gens on a single 24V regulated supply

http://www.active123.com/PSF32024PF-...-Prodview.html

[monza]

Originally Posted by sphelps

I ran my multiple first gens on a single 24V regulated supply

http://www.active123.com/PSF32024PF-...-Prodview.html

That looks promising to run pumps off of for sure.

[daplatapus]

Hmmm, cool. I'll have to check that out.
Thanks

Originally Posted by sphelps

I ran my multiple first gens on a single 24V regulated supply

http://www.active123.com/PSF32024PF-...-Prodview.html