Evergrow lights

[SteveCGY]

Originally Posted by saltie

Would like to ramp down intensity on custom and maybe try my own settings in manual. Can these lights simulate a storm?

In "custom" mode you can change the intensity of each channel to the %(there are two channels) and you can change that intensity to the half hour. You will set your current time into the light then go to custom and start changing the intensity on each half hour or hour what ever you prefer

Example

0:30 Channel A 0% channel B 1%
1:00 channel A 1% channel B 5%
1:30 channel A 5% channel B 5%
Etc...

Each channel does 1-100%

For example mine goes from 0% on both channels at midnight to 100% on both channels at noon and will remain that way until 4pm then it will ramp down slowly until midnight when it's back at 0% on both channels.
Hope this helps.

[saltie]

Originally Posted by SteveCGY

In "custom" mode you can change the intensity of each channel to the %(there are two channels) and you can change that intensity to the half hour. You will set your current time into the light then go to custom and start changing the intensity on each half hour or hour what ever you prefer

Example

0:30 Channel A 0% channel B 1%
1:00 channel A 1% channel B 5%
1:30 channel A 5% channel B 5%
Etc...

Each channel does 1-100%

For example mine goes from 0% on both channels at midnight to 100% on both channels at noon and will remain that way until 4pm then it will ramp down slowly until midnight when it's back at 0% on both channels.
Hope this helps.

How do I set the time? With no paperwork I'm guessing about everything. What does the star symbol on the remote signify?

[SteveCGY]

To change the time you will hit "menu" then scroll down to "settings" then down to "date and time" as for the star symbol i am not sure as i never use the remote because i have set my 24hr schedule and left it with that.

[jettawagon]

Just waiting for mine to come in. If you shearch YouTube there are a few vids on programming

[saltie]

How do you get to ch 3 ?

[SteveCGY]

Originally Posted by saltie

How do you get to ch 3 ?

There is only 2 channels

[nrosdal]

just tracking down a pdf fils i can send ya since there was not one in box for whatever reason. If you have programming questions i can give ya a quick walk through over phone or text if you wanna call me 250-861-5515

[saltie]

Originally Posted by SteveCGY

There is only 2 channels

Not according to the product description.