![]() |
|
#1
|
|||||
|
|||||
![]() |
#2
|
|||||
|
|||||
![]() Borrowed a power supply and controller. And it turns out to be the pump.
![]() |
#3
|
|||||
|
|||||
![]() mine kicked it a few weeks ago, too. Controller went. I managed to get a replacement for it and try it out, and the pump was seized! I took the impeller out and fiddled with it enough, and it eventually turned back on.
However, I still bought a new return pump. (tunze) |
#4
|
|||||
|
|||||
![]() I picked up a Laguna. See how it does. Though I did like the feed mode on Dc pump
|
#5
|
|||||
|
|||||
![]() These pumps simply are not reliable. It's too bad because they put out some nice flow for 80ish watts. I still am not sure what to replace mine with.
|
#6
|
|||||
|
|||||
![]() I have been running 4 of these water blisters for over a year now, haven't had a issue with any, come to think of it it's been a year I should clean them
http://www.coralvue.com/reef-octopus...ster-7000-pump
__________________
360 gallon sps reef, 180 gal sump, bubble king supermarine 300, 4xmp40Wes, 2 x 6215 tunze waveboxes, 4 ghl mitras 360 Reef Tank |
#7
|
|||||
|
|||||
![]() Agreed I hate them with a passion but once you go DC I find it's hard to go back. I picked up the new 12000 in hopes the improvements continue past the power supply and controller.
|
#9
|
|||||
|
|||||
![]() What is the 12000? Is that waveline? My issue is the impeller seizing and it doesn't appear to be precipitation on the bearings. I always have to manually turn the shaft in my hand a few times to loosen it. I do soak in vinegar for a few min too but I'm always in a hurry to get my system back online.
|