![]() |
|
#1
|
|||||
|
|||||
![]() The acro will likely continue to recede, so ya, I'd cut it at the half way point. The hammer looks fine for now, I wouldn't worry too much. Are you running carbon?
__________________
Brad |
#2
|
|||||
|
|||||
![]() Yes, chop it again unfortunately. You will have to keep doing it until it stops RTNing or dies off...
|
#3
|
||||
|
||||
![]() A nice piece to a tiny piece. What a shame. I glues the receeding pieces behind it in hopes it will come back to life. The first initial receeded piece I frag onto a plug looks like its still alive.
![]() |
#4
|
||||
|
||||
![]() Yes I've been running carbon Brad. Got about 1-2 cups in my sump in a mesh bag. Changes it 2 weeks or so ago. Some ppl told me I shouldn't be putting the already fully recessed frags in the same system as my DT. True?
|
#5
|
|||||
|
|||||
![]() At this point I'd just sit back and see what happens. The acro will live, or not. Playing around with it too much could cause more problems than it could fix. I would personally remove the receded pieces, they aren't going to do much but slough off the rest of the tissue into the tank.
__________________
Brad |
#6
|
||||
|
||||
![]() Should I give my hammer a revive dip? It's excreting its guts a bit
|
#7
|
|||||
|
|||||
![]() I'd just leave it for now. Annoying it further probably won't help. See what it does ever night.
__________________
Brad |
#8
|
|||||
|
|||||
![]() It's just waste. Just do water changes and sit and wait. The more you fiddle the longer it'll take. Patience
|
#9
|
|||||
|
|||||
![]() Quote:
I say this as your current carbon is weeks old and only in a bag (passive) And even if you had a reactor for the carbon, I'd still suggest changing it until things calm down At the very least, keep up with some WCs and you should see a turn around |