Reef Pilot's Undersea Oasis

[Reef Pilot]

It is a 100 gallon acrylic tank (72” X 18” X 19”) with a 3 sided overflow at one end draining down to a basement sump. Here are some early pics. This was about 6 months after we moved in. The tank had been running for about 10 years.







As you can see, the tank was pretty full with softies and some LPS. I fragged the large toadstool and still have a smaller version of it in my downstairs tank, which was set up about a year later. And that bubble coral and frogspawn have been fragged many times as well. Same with the colt coral and sinularia. Might not be visible in these pics, but also have green mushrooms and green palys, which I keep selling or give away.

I still have some of the original fish including the Yellow Tang (10+ years old), Dwarf Flame Angel, Flame Hawkfish and Cinnamon Clownfish. I sold the Green Bird Wrasse. I added a couple Pearlscale Butterfly fish, and a Lawnmower Blenny just before these pics. The tank was also full of Aiptasia, but the Pearlscales completely decimated them…, although took about 4 or 5 months. I still have them as well, one in each of my tanks. And they don’t bother my corals either.

I had T5’s for lighting. Water flow was handled by a couple Koralias and a closed loop system (no longer used). The tank was also a big chore to clean, as it was full of algae and detritus on the rocks and sand. Nitrates were as high as 100 ppm! I wasn’t measuring phosphates at that time, but I know they were high, too. Probably a classic example of old tank syndrome. Fish didn’t seem to mind, though, and the softies and LPS were doing OK as well.

Next, I will describe my sump. But feel free to comment anytime if you wish.

[Slyguy00]

Wow walter what a transformation! It looks nothing like it did then. You really stepped it up from what it was!

[Reef Pilot]

Originally Posted by Slyguy00

Wow walter what a transformation! It looks nothing like it did then. You really stepped it up from what it was!

Thanks, Nick. It didn't transform overnight, that's for sure, and lots of lessons learned along the way. Before I start showing my current tank, I will try to step through the changes, and some of my challenges.

[Slyguy00]

Awesome, I'm sure there will be a lot to learn in this thread!

[Delphinus]

Do your pearlscales eat pellet or flake?

[Reef Pilot]

They eat everything, pellet, flake, frozen, just like all the other fish. Having said that, I did have to train them in the QT, first frozen mysis, then freeze dried and finally pellets. But they are much easier to keep and hardier than a Copperband which I also had. And you can keep more than one in the same tank (unlike Copperbands). However, over time they did quarrel more and more, and finally separated them when I set up a 2nd tank downstairs.

[Reef Pilot]

It is a 30g acrylic sump, in the basement under the stairwell, just below the upstairs tank.



The drain goes into an input chamber with a couple baffles that holds a sponge filter and flows into the main chamber with the skimmer. The top does lift up, and I tried using a filter sock, but it was pita to clean all the time, and was much easier just to remove and squeeze out the sponge every few days. If the sponge plugs (as when away on vacation), it just lifts between the baffles and the water flows by.

The return pump was a Mag 18, and had to push water up about 12 feet or so, into the display tank upstairs. Needless to say, flow was considerably less than 1800 gph. I did measure it at the top once, and I think it was less than 200 gph at that point.

Initially there was no ATO, and had to manually top off the sump on a daily basis with RO water from a bucket. There was a line coming down from the RO (no DI) system upstairs under the kitchen sink, which was used to fill the top off bucket and the water change barrel. Needless to say, I did not like the constant attention this required, so I obtained a double float control from Canadian Springs (who maintained the RO system at the time) and connected it directly to the RO line to serve as my ATO. Worked pretty good and kept the water level constant for the skimmer. I honestly don’t know how the previous owner put up with the manual system for 10 years.