|
|
|
|
|
#1
08-08-2013, 01:35 PM
|
|||||
|
|||||
I've ditched my controller entirely. I have a profilux not an apex, so I'm not too familiar with them. But with the profilux, I can tie them together and run them through a random mode. It took a bit of messing around but looking back its simple enough.
I put 4-25's on my 300 in each corner, works very well. There is not a single dead spot in the tank. I did like the else mode, but having control over each one is real nice. Sorry couldn't be more help, but for me, control over the powerhead and a random pattern through the profilux, made me ditch the controller. Bob
__________________
There's plenty of room for all God's creatures. Right next to the mashed potatoes. 
|
|
#2
08-19-2013, 09:11 PM
|
||||
|
||||
|
Should you find the time, could you describe in more detail how you connected these pumps to the Profilux? I see you use the Profilux EVG card, but i can't see exactly how it's all connected and what you use to power the pumps.
|
|
#4
08-21-2013, 03:43 AM
|
|||||
|
|||||
|
I run mine through my Reef Angel controller, works like a charm. Plenty of codes available and a few that are very similar to the else mode. I guess any controller could reproduce the else mode? All you have to do is fine the right coding?
I don't know much about other controllers though.
__________________
_________________________ More fish die from human stupidity than any other disease...
|
Hybrid Mode
