62G Starfire Reef [40x18x20]

[JDigital]

Originally Posted by daplatapus

Ya, I had an SRO int2000 as well and it didn't work well at the depth they said either. Mine seemed to work the best right around 6" if I remember correctly. One thing I found though is that it raised the effluent discharge a fair bit and the water exiting the skimmer got noisy. I put an elbow on it which did quieten it down but I found out that if you turn that elbow down all the way so that it's totally submerged, it air locked. SO I had to turn it a bit so at least a bit of the elbow was out of the water so that air could escape.

The other problem I had was that piping isn't standard size and I had to use a bit of spa flex filed down on one end to connect the elbow to the discharge of the skimmer.

I'm curious where you had your gate valve set on the outlet nozzle. Mine doesn't seem to be much more open that it was before.

As of this morning I still didn't really have any substantial amount of skimmate in the cup. Good amount of foam right at the top of the collection cup neck though.. I've had this thing overflow on me a few times so I'm nervous to close down the gate valve much more than it already is.