|
|
|
|
|
#2
05-19-2013, 01:28 AM
|
|||||
|
|||||
I think it's the other way haahaa! Probably stack rock in the middle and have the two sides "drop" away.
|
|
#3
05-21-2013, 04:44 PM
|
|||||
|
|||||
|
rickcasa has it right.
 I plan to fill the two sides with a DSB. I was going to fill them all the way with sand, but recommended depth for DSB is 6" max so I will put some plenums in at about 5" the center part will have rocks to the top of the DSB and I will place my corals up from that in the center. I have the 4 way running under the rocks so should have good flow in the center section.
__________________
150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller 180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return.
|
|
#5
05-21-2013, 07:20 PM
|
|||||
|
|||||
|
well this is different :-)
|
|
#6
06-12-2013, 01:50 AM
|
|||||
|
|||||
|
Update.
Finished the plenum and some of the plumbing. I need to take the Ocean Motion off of my other tank still, but that will be a bit later. I did put in some water and rock from my other tanks to get things moving along. I also bought one of those Speedwaves for my return pump. I was going to run my Dart but I will keep that as a back up for my other tank now. Some pictures of the progress.      
__________________
150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller 180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return.
|
Hybrid Mode
