![]() |
|
#1
|
||||
|
||||
![]() Thanks.
The cartridge is fairly new and it reads zero straight out bin initially. I tend to think the bin leaching may be the culprit too, as when I did my first TDS reading in there it was showing over 50ppm. I gave a good rinse and it shows zero initially, but then after a day or two it shows 10. May try different bin. My meter is a hand held one you dip in water - If someone is in the market for one, I got it free with my household Zero water filter - Like a Brita only better. |
#2
|
||||
|
||||
![]() Quote:
|
#3
|
||||
|
||||
![]() Leanne, dont know where you are getting your info...
I believe what you are saying is incorrect Read : http://www.twincities.com/ci_9454447e Looks like 5 is ok, 1 and 2 are as well, 4 is as well but is disposable Anyone else know anything about this? |
#4
|
|||||
|
|||||
![]() TDS could be collecting on the insides of your bin as well, maybe just rinse then DRY it out once a month or so, you will be shocked what you see on the cloth you use to dry it out...brown gunk!
__________________
_________________ Cheers Ronnie. 75 gallon in-wall SPS dominant and some sweet zoas, attached 30 gallon refugium/seahorse tank, attached 15 gallon mangroves/bad boy tank/pod factory, 40 gallon sump. |
#5
|
||||
|
||||
![]() thanks grey reef, useful info.
I will try cleaning bin first. tks |
#6
|
|||||
|
|||||
![]() I really think you will see an improvment with this, at least before you take drastic measures and start replacing stuff. A cheap easy soultion hopefully. I know it helped my TDS. I always clean it and DRY it out (about once a month)then double check my TDS reading, then if still high then change out the membrane when required.
__________________
_________________ Cheers Ronnie. 75 gallon in-wall SPS dominant and some sweet zoas, attached 30 gallon refugium/seahorse tank, attached 15 gallon mangroves/bad boy tank/pod factory, 40 gallon sump. |