Speedwave DC pumps?

[fixerupper]

I have both the DC3000 and DC5000. They are very quiet and the controllable speeds are way handier than I anticipated. There has been discussion on some forums about misaligned threads (on the intake side?) but threads on mine are fine all around. I ran mine on the Kill-A-Watt meter and at maximum speed and about 5' of head they use more power than their stated maximum but at the lower speeds they use less than published. In my application used in sumps as return and skimmer pumps, they have been trouble free for the few months I've had them. Compared to the Sedras and Mags I've used, they have less vibration/noise and much more efficient. The controllers seem to be interchangeable between the sizes too. I think they come back on to the last used speed setting after being unplugged but I use my return on the lowest setting so ill go verify and report back if its any different. It seems to me that the similarly rated GPH Sedras handled higher head pressures better than these but that's just a seat-of-the-pants impression. All in all I'm very pleased.

[FragIt Dan]

Originally Posted by fixerupper

I have both the DC3000 and DC5000. They are very quiet and the controllable speeds are way handier than I anticipated. There has been discussion on some forums about misaligned threads (on the intake side?) but threads on mine are fine all around. I ran mine on the Kill-A-Watt meter and at maximum speed and about 5' of head they use more power than their stated maximum but at the lower speeds they use less than published. In my application used in sumps as return and skimmer pumps, they have been trouble free for the few months I've had them. Compared to the Sedras and Mags I've used, they have less vibration/noise and much more efficient. The controllers seem to be interchangeable between the sizes too. I think they come back on to the last used speed setting after being unplugged but I use my return on the lowest setting so ill go verify and report back if its any different. It seems to me that the similarly rated GPH Sedras handled higher head pressures better than these but that's just a seat-of-the-pants impression. All in all I'm very pleased.

In addition to the misaligned threads there were also issues with some of the Orings on the existing pumps. I have spoken directly with the guys at H20 systems to ensure these issues will be resolved with the next gen pumps. I have decided to wait for the new ones which I hope to see in a month or so.
Dan

[fixerupper]

I must have got my 3 pumps...I guess 4 if you count the RLSS 8 skimmer...after they resolved the issue with the threads. My pumps are all used in the sump so I don't know if that 'leaky seal' problem as already been addressed as well. I read somewhere that an orange O-ring is available and solves the external use issue. If this was a known defect I don't know why they weren't just included. Still, a pretty darned solid first attempt. I'm looking forward to seeing what the new models have in store.

[lastlight]

i had to wait until my 2640 came into the store which was only a couple days ago so the thread problem still persists it seems. maybe only on certain models?

[fixerupper]

Ach, Speedwave. Mine are Waveline. I thought they were identical, just rebranded but apparently not. My bad.

[lastlight]

Originally Posted by fixerupper

Ach, Speedwave. Mine are Waveline. I thought they were identical, just rebranded but apparently not. My bad.

what i've read online idicates you're right tho. waveline, speedwave and diablo all being the same. maybe mine is old stock somehow...

[mikepclo]

Price just dropped on these pumps SWDC1320 was $239 now only $168 and 2640GPH $210!! And I just bought on a month ago.