NEW Tank Build !!!

[denny_CC]

Originally Posted by Aqua-Digital

No idea but if its gonna start another debate I am not telling

if you go to put the mp10's on the acrylic it wont work its to thick tried with my cube which is the same as yours pretty much, on the glass and your good to go though

looking stellar michael man cant wait to see what you do with this puppy


cheers


denny
concept aquatics

[Aqua-Digital]

crap you are right I forgot about the acrylic that adds 3mm.

MP40's way overkill, looks like tunze is going to be the route sadly.

[lastlight]

mp40s for your needs would run pretty low which also means semi quiet.

[Aqua-Digital]

Originally Posted by lastlight

mp40s for your needs would run pretty low which also means semi quiet.

true, will have to think.

[sphelps]

If you can pick a permanent location you could use a hole saw with a drill guide to remove the acrylic where the MP10 will sit.

[Aqua-Digital]

Originally Posted by sphelps

If you can pick a permanent location you could use a hole saw with a drill guide to remove the acrylic where the MP10 will sit.

The acrylic is inside the tank.

[sphelps]

Originally Posted by Aqua-Digital

The acrylic is inside the tank.

I know where it is You can easily get a drill and a guide in there, yes you'll have to drain the water but it's an idea if you're set on using MP10s