![]() |
|
#1
|
|||||
|
|||||
![]() Ph is the last thing to concern with right now.
Let the tank cycle and things MAY level out on their own.
__________________
![]() My 70 Gallon build: http://www.canreef.com/vbulletin/showthread.php?t=66478 My Mandarin Paradise: http://www.canreef.com/vbulletin/showthread.php?t=72762 I wonder... does anyone care enough to read signatures if you make them really small? I would not. I would probably moan and complain, read three words and swear once or twice. But since you made it this far, please rate my builds. ![]() |
#2
|
|||||
|
|||||
![]() What's ph. Lol
It'll come around on its own |
#3
|
|||||
|
|||||
![]() What are you testing your pH with ?
Maybe having it that low is no big deal, but I'd prefer to see it a bit higher if it were my rock A powerhead with aeration, or an air pump, may help your low pH Don't try to adjust it with chems though Either try to add some aeration or let it be |
#4
|
||||
|
||||
![]() I just placed everything in the tank and we'll see how things adjust over the next while as I will be testing the water frequently anyways. I'm using the API test kit just bought it. The other few things that I had tested are as follows
calcium-540ppm which is a little high I think dkh- 18 !!! through the roof SG- 1.025 pH-7.4 The only thing I have not tested yet which could be contributing factor is Mag. I will test that tomorrow. I agree I would rather not start adding this and that and end up having more problems down the road. Thanks again
__________________
Jennifer |