![]() |
|
#1
|
|||||
|
|||||
![]() mine have worn out on my calcium, alk and magnesium kits. I dunno if got a bad batch but i'm not the only person with the issue. I clean them after each use but i only use a paper towel so i dont believe it would be abrasive enough to remove the printing.
|
#2
|
|||||
|
|||||
![]() I also wash and dry with paper towel and never had that issue. Maybe it's oils on your hand, or salt water? Do you store them in the box?
__________________
Brad |
#3
|
|||||
|
|||||
![]() Yes, all the kits are stored in the original boxes after everything is dried.
all the pieces are washed in ro/di water and my hands are thoroughly washed before i do anything in my tank. I generally dont have oily skin so i dont believe thats the issue but i'm only guessing. all three of my syringes are worn and i have over half the test kits left (Atleast) for all three. |
#4
|
||||
|
||||
![]() Quote:
I use the syringes from the other kits. |
#5
|
||||
|
||||
![]() I have used salifert for years and have not experienced this issue. They are are very good test kits I hope this doesn't continue to be a problem.
|
#6
|
|||||
|
|||||
![]() Check eBay. I just ordered 20 5 ml syringes for less than 4$ shipped.
__________________
the lurker formerly known as THENEWGUY 75g reef w/ 20g sump, 100lbs LR, Tunze 9006 skimmer, 3 part dosing, DIY 66 LED fixture, Reefleeper Lite LED build here: http://www.nano-reef.com/topic/29498...h-mount-build/ |
#7
|
|||||
|
|||||
![]() Quote:
I've found a local source to try some higher quality syringes. If they work I'll order a box. |
#8
|
|||||
|
|||||
![]() Had the same problem with the Red Sea syringes. I painted the graduation markings with clear nail polish. Be careful on the first coat as it may slightly smear the lines. So far working great.
|
#9
|
|||||
|
|||||
![]() I'm gonna use a similar technique once I get a new set. Either clear polish, clear tape or one of those clear screen protectors that's adhesive backed.
|