who's running the vortex mp10

[Salt2Death]

Any one get them to work on 1/2 glass??


Sent Via The Pirate Ship...

[Plainswalker]

Running an MP10 on my 35g on 80% reefcrest.

[ScubaSteve]

Originally Posted by Salt2Death

Any one get them to work on 1/2 glass??


Sent Via The Pirate Ship...

Don't work. I wanted to put mine on my back glass but totals 1/2" (actually a little bit less) because there is a cosmetic black acrylic sheet over the back glass. Don't hold. I have to stick it on my side glass.

[Duker]

I run two along with my mp40 at 80% on reef crest (yellow), one mp10 at 80% on reef crest (yellow)and the second mp10 at 80%on nutrient uptake (purple).

[mikepclo]

This???

http://www.youtube.com/watch?v=1vkGaGgUmnU

[viperfish]

Reef crest at 80% for me. I just wish it wasn't so damn loud!

[madchild]

I have one running reef crest at 100% along with 2 Koralia 1050's.

[blacknife]

Had 2 on my 55 <36x18x21> thought there was lots of flow till I bought a mp40 to hold while replacing a dunked control. mp40 is a little strong for the some of my corals to be right in front of but an inch or 2 out of the stream is ok. mp10 left mp10 back mp 40 right. 10's at 100% 40 at 80ish. I switch between tidal swell and nutrient uptake once every while.

to bad the 10s wont fit on the next build 2 new 40s is going to add to the cost

happy with them other than that.

[NIVLEM09]

I have one mp10w es and is on short pulse mode,running at 50% to minimize the noise,supplemented with two koralia 750.