Hot water through my ro unit!

[gregzz4]

I installed one of these valves on my cold line and am really happy with it
Also, if you don't have one, my unit came with this drain saddle setup and it works great. Just be sure you install it above the p trap

[11purewater]

Originally Posted by gregzz4

I installed one of these valves on my cold line and am really happy with it
Also, if you don't have one, my unit came with this drain saddle setup and it works great. Just be sure you install it above the p trap

That's the ticket for your feed but if you're running the drain/concentrate line to a drain saddle it need to be air gapped to prevent bacteria from crawling back into your RO system.

[gregzz4]

Originally Posted by 11purewater

it need to be air gapped to prevent bacteria from crawling back into your RO system.

Mine's setup on an otherwise unused bathroom sink, but could you please elaborate on this ?

[11purewater]

Originally Posted by gregzz4

Mine's setup on an otherwise unused bathroom sink, but could you please elaborate on this ?

By plumbing code it's technically a cross connection.Usage of that drain line doesn't matter since it's still connected to your sewer.On an RO for drinking water you'll find the tap is outfitted with a air gap.

[11purewater]

An air gap is usually one inch above flood.for instance if your kitchen sink overflows that water never touches the spigot.

[11purewater]

Sorry to highjack your thread

[gregzz4]

Originally Posted by 11purewater

Sorry to highjack your thread

I don't think we're hijacking as the OP is considering installing what we are talking about , and you already answered her initial question

[gregzz4]

I think I follow
I gather you meant that the height of the hose in the saddle should be at or higher than the crown before the trap arm ? Right ?

I initially thought you were talking about how to put the hose into the saddle

Now you've got me thinking about having the RO waste line loop up above the saddle as I do rinse frozen food in this sink

[11purewater]

Nope there actually need to be a break in the drain line one inch above the sink and then falls into the ABS drain by gravity.