Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > FOWLR

Reply
 
Thread Tools Display Modes
  #1  
Old 12-09-2012, 02:12 PM
whatcaneyedo's Avatar
whatcaneyedo whatcaneyedo is offline
Member
 
Join Date: Apr 2007
Location: Prince George, BC
Posts: 2,198
whatcaneyedo is on a distinguished road
Send a message via MSN to whatcaneyedo
Default

Quote:
Originally Posted by Coralgurl View Post
Since the temps dropped this week, I haven't been able to see out any windows. We need to look into something to deal with this as well.
Take a trip to your local hardware store and buy a package of shrink wrap film and double sided tape. Thats what we have to use on our windows otherwise they would be so covered with condensation and ice we wouldn't be able to see out of them for 7 months of the year.

Mould is an issue in the place that I rent as well. But not necessarily because of the tank. With the tank alone the humidity in here right now is only about 40% but as soon as we boil something in the kitchen or take a shower it jumps to 60% because there are no exhaust fans in any of the bathrooms or kitchen. There is also only R 24 in the ceiling and patches in the wall with no insulation at all. Plus I've been told that this house was once used as a minor grow-op so the mould problem existed before we even moved in.

So in addition to shrink wrapping and the occasional diluted bleach cleaning we keep the furnace fan running constantly to disperse the humidity evenly throughout the house. We also keep all of the furniture an inch or so back from the exterior walls to allow air to flow behind them.
__________________
"We shall dive down through black abysses... and in that lair of the Deep Ones we shall dwell amidst wonder and glory forever." - H.P. Lovecraft

Old 120gal Tank Journal
New 225gal Tank Journal
May 2010 TOTM
The 10th Annual Prince George Reef Tank Tour
Reply With Quote
  #2  
Old 07-19-2013, 01:26 AM
Prariecanuck Prariecanuck is offline
Member
 
Join Date: Jul 2013
Location: Saskatoon
Posts: 84
Prariecanuck is on a distinguished road
Default

I'm journey men sheet metal worker and the best way to deal with humidity by large aquatic system is an hrv ideally put an outlet in the room the aquarium is in just like you would a bathroom and put it on a timer so it runs 6 hrs at least during the day broken up by a few time slots. 2 hrs in morning 2 in the afternoon and 2 in the evening and because it regains the heat as it changes air it won't add a lot to the heating bills in the winter
Reply With Quote
  #3  
Old 07-19-2013, 02:48 PM
The Guy The Guy is offline
busy with fresh water.
 
Join Date: Dec 2011
Location: Kelowna, BC
Posts: 1,041
The Guy is on a distinguished road
Default

Good air circulation in your home is the key to control air quality, make sure you keep air moving and address dead air zones with circulation fans. If you can afford central air it will help with lowering humidity in your home, but keep your furnace fan running and keep that air moving.
__________________
Hey! I never "LEFT" the hobby, just doing fresh water now. Which is still listed as part of Canreef if I'm not mistaken.

Last edited by The Guy; 07-19-2013 at 02:51 PM.
Reply With Quote
  #4  
Old 08-08-2013, 06:49 PM
Simons's Avatar
Simons Simons is offline
Member
 
Join Date: Dec 2012
Location: Calgary
Posts: 131
Simons is on a distinguished road
Default

I find Calgary extremely dry, even now in the summer my basement where my 250 G tanks is situated the RH is only 41%, upstairs on my main level where I have a 100 G tank it's 36% on average.

I would imagine if your tank is in a 'fish room' or a smaller foot printed area then it could be a problem, I just never thought about mold due to high humidity. I would agree, air movement is critical to ensuring good air quality.

My basement windows are completely clear and I would estimate my evaporation rate is about 12-14 Gal per week judging by the size and replenishment frequency of my ATO tank.
__________________
130 Gal Community Planted Tank and a 250Gal Peninsula FOWLR

Last edited by Simons; 08-08-2013 at 06:51 PM.
Reply With Quote
Reply

Tags
mold problems


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 01:55 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.