Gravity feed top off help

[don.ald]

Thanks

[molotov]

I have that exact same setup also using gravity. Do you have PVC coming from your reservoir? Send a picture and I'll try to do the same.

[don.ald]

Originally Posted by molotov

I have that exact same setup also using gravity. Do you have PVC coming from your reservoir? Send a picture and I'll try to do the same.

If your asking me for a pic?? I don't have one. I have not created the top off yet! It's in the planning phase.

[Seriak]

When I had one, I just drilled a hole and put the tube into my container and gooped/silicone the crap out of it. Worked for years. Today I would just by a bulkhead.

http://www.bulkreefsupply.com/catalo...t/view/id/941/

[don.ald]

Originally Posted by Seriak

When I had one, I just drilled a hole and put the tube into my container and gooped/silicone the crap out of it. Worked for years. Today I would just by a bulkhead.

http://www.bulkreefsupply.com/catalo...t/view/id/941/

I like it, but shipping would be $20

Home Depot would be the best bet

[SpikeJones]

How would I go about making a Gravity feed

Thanks

[Proteus]

Bulkhead in bottom of bucket with line going to float valve. Have bucket higher than sump

[Seriak]

Originally Posted by don.ald

I like it, but shipping would be $20

Home Depot would be the best bet

I agree, Home depot or Rona is best, but they never seem to have true bulkheads.

You could also try getting a bulkhead from Mistking. They have distributors in Canada.

http://www.mistking.com/Premium-1-4-...-Bulkhead.html

If anyone knows where to find John Guest bulkheads in Canada, please let me know where.

[Proteus]

Try bartel and Gibson. They should have them