Where does one get a large aquarium in Canada? (200-240 gal)

[cyberdude47]

My recommendation is to stay away from bow valley aquarium in Calgary. I had got him to build my 500 gal and a few others built for ppl i knew also with nothing but poor quality workmanship and I know others that have had them build from them at later dates with the same opinions of quality.

[Northernseacorals]

Dave @ Concept

http://www.conceptaquatics.ca

Just built a 4 foot by 8 foot for me; could not be more pleased with the build quality.

[reefwars]

Originally Posted by Northernseacorals

Dave @ Concept

http://www.conceptaquatics.ca

Just built a 4 foot by 8 foot for me; could not be more pleased with the build quality.

they do a great job eh your tank looked amazing!

[MMAX]

Originally Posted by cyberdude47

My recommendation is to stay away from bow valley aquarium in Calgary. I had got him to build my 500 gal and a few others built for ppl i knew also with nothing but poor quality workmanship and I know others that have had them build from them at later dates with the same opinions of quality.

Nothing wrong with their workmanship, just poor quality glass and even more poor quality customer service/attitude.

[jagermaier]

Originally Posted by MMAX

Nothing wrong with their workmanship, just poor quality glass and even more poor quality customer service/attitude.

+100

[michika]

Another bump for Dave and Concept. He's built all the tanks on my 1000g system so far and they've all been excellent.

[reefgirl189]

Ditto on Dave at concept. Very pleased with my 180 eurobraced starphire front and my sump. Even friends who have no s/w experience call it a sexy beast.

[molotov]

Dave at Concept built all the tanks for my setup. Outstanding quality. He's the only guy I would ever go to.

[Ross]

Originally Posted by MMAX

Nothing wrong with their workmanship, just poor quality glass and even more poor quality customer service/attitude.

I disagree.

When they made my 67gallon corner over flow tank, 1 of the drain holes was drilled so close to the edge of the overflow that the bulkhead couldn't be installed without modification.

I ended up trimming about 1/3 of the bulkhead's flange away in that area.

The tank is 3/8" glass and it was eurobraced with 3/4" x 4" glass on the top.
Accessing the overflow to install the bulkheads and pipes was impossible without removal of the sides of the brace.

Zero support from them to fix it.

[cuz]

Concept

That is all!