#11
|
|||||
|
|||||
Were you able to get that thread issue figured out? I remember reading somewhere you were having a bit of trouble matching threads and someone else had a bit of leaking. Just wondering if they're non-standard threads...
|
#12
|
|||||
|
|||||
Yes I did manage to get a std fitting threaded on the the pump after about an hr of tread chasing with a file. I think it is a standard thread but it has no actual start thread on it, if you know what I mean. Got the fitting on with some teflon tape and no leaks
__________________
Feed the bear goodies, make a new friend, don't feed the bear............... 8' - 165gal Reef DIY LED's Build 2012 Nano Contest Winner Febuary 2013 POTM Winner 300 gal + 60 gal Complete DIY Build |
#13
|
||||
|
||||
Hi,
I see people throwing decent suggestions such-as the blaster range which is amazing! IF you have the money and like the brand go for it. In the past I have always us Ehiem but I have recently started to switch over to Danner Mag Drives (Supreme). I have never had a bad experience with either - I just prefer the price and the feature set is same. Good luck! |
#14
|
|||||
|
|||||
Quote:
I'd also recommend the DC waveline 5000 but can't recommend them external as both my wavelines leak slightly from the housing. Last edited by sphelps; 10-15-2012 at 03:31 PM. |
#15
|
||||
|
||||
Quote:
Having to replace a plumbed in pump for a new brand may require plumbing adjustments which if anything could be a very annoying experience - especially when you have time against you I.e. live stock that has a dependance on the system running. I would maybe investigate whether a replacement is an option. |
#16
|
||||
|
||||
I should have mentioned that I'm a fan of the wavelines as well!
__________________
Mark... 290g Peninsula Display, 425g total volume. Setup Jan 2013. |
#17
|
|||||
|
|||||
Quote:
|