Is GE silicone I is for reef?

[tang daddy]

Originally Posted by Aquattro

Because it's ridiculously marked up, it's a small tube and won't do larger jobs, and there are plenty of alternatives.

Well Brad, I get my Aquarium safe silicone tubes for $15 but that's me, everyone else gets theirs at a store for probally around $20, a regular tube is $5 at hd, so really you're saving $15 but is the saving of $15 really worth losing your reef?

I am just sayin, for a cost of a dinner it's not worth the risk at least not for me.

Maybe in Victoria you get toothpaste tubes but here on the mainland we get standard silicone tubes, the size that fits caulking guns.... Again just sayin!

[The Grizz]

I bought a whole case of 24 tubes SCS 1200 for $116 in Calgary @ Sabic for my 300 build so under $5 a tube.

[justincgdick]

Originally Posted by tang daddy

Why nOT just buy aquarium safe silicone from the local store, $20 is no big deal when you could potentially lose 100's.

After hearing and seeing the horror stories online, I would not risk it!

Originally Posted by mrhasan

Yah I have also decided buying the mariland silicon from Big Al's. Not taking the risk; not worth it to save a few $$.

There's no risk with GE SCS1200. It's what should be used exclusively, unless you can find a comparable. I haven't found one.

Originally Posted by Aquattro

Because it's ridiculously marked up, it's a small tube and won't do larger jobs, and there are plenty of alternatives.

+1

I'm with Grizz. I got mine for around $7-8 per tube of SCS1200 but I only bought a few. People stress over what to get and try to cut corners with GEll when everyone should be using SCS1200.

[Aquattro]

Originally Posted by justincgdick

People stress over what to get and try to cut corners with GEll when everyone should be using SCS1200.

depends on what they're doing. If you're just adding baffles to a sump, or other small job, regular silicone is more than enough. If you're building a tank, then ya, the 1200 is the stuff to use.

[tang daddy]

Originally Posted by Aquattro

Because it's ridiculously marked up, it's a small tube and won't do larger jobs, and there are plenty of alternatives.

Well Brad maybe we should sticky other reef safe silicones like the one you use and the scs1200 so everyone knows....thanks

[Aquattro]

Originally Posted by tang daddy

Well Brad maybe we should sticky other reef safe silicones like the one you use and the scs1200 so everyone knows....thanks

Thought I did stick the last thread where we all identified the ones we used...?


http://www.canreef.com/vbulletin/showthread.php?t=88439

[The Grizz]

Originally Posted by Aquattro

Thought I did stick the last thread where we all identified the ones we used...?


http://www.canreef.com/vbulletin/showthread.php?t=88439

What type of silicone did you use to make it stick Brad?

[Aquattro]

Originally Posted by tang daddy

Well Brad, I get my Aquarium safe silicone tubes for $15 but that's me, everyone else gets theirs at a store for probally around $20, a regular tube is $5 at hd, so really you're saving $15 but is the saving of $15 really worth losing your reef?

I am just sayin, for a cost of a dinner it's not worth the risk at least not for me.

Maybe in Victoria you get toothpaste tubes but here on the mainland we get standard silicone tubes, the size that fits caulking guns.... Again just sayin!

We do get toothpaste tubes, but for me, the hardware store with safe silicone is closer than the LFS. Like i said, it's readily available. If you're going to the fish store, you might as well go to the hardware store..