large clean frag tank / sump

[ferret]

The thickness of acrylic panel is 1/4" or 3/8" ? Please advice & tks.

[KevinK]

Originally Posted by ferret

The thickness of acrylic panel is 1/4" or 3/8" ? Please advice & tks.

1/4 inch

as you can also see, on the picture, about 1/2 way up it's hight, it has a 1 inch brace all around going horisontal.

when it was build it had the botom plate, with a 1 inch strip bonded on to it, than the side pannels sid on the inside cemented in, and than on the inside it has a square rod cemented in its corner again, making it a 3 double seal.

the top edge is about 3 inches wide, and again braces.

the side corners also have the square rod in the corners on the inside, again a 3 double seal

and than on the top, as you se 2 brackets, gust to make shore, I have never seen it bow, but I gust wanted to have them there, gust in case

[Aquattro]

Kevin, we do need a price please.

[KevinK]

Originally Posted by Aquattro

Kevin, we do need a price please.

lets start at 450

[KevinK]

no fraggers around, ore somone in need of a large sump?

[KevinK]

Need to make some space,

No interest ?

[Aquattro]

Originally Posted by KevinK

No interest ?

I think the problem is that's a pretty huge frag tank Most people will be in the same position, not enough room.