![]() |
|
#1
|
|||||
|
|||||
![]() K. I set up a cube tank. Took Rick and water from existing tank. And also added 5 gallons of fresh mix ro water. No carbon or gfo yet.
Bulbs from other system were replaced may 5th. All water perameters are good. I dosed old system every three days so I don't suspect alk I use salinity salt and salinity is at 1.025 I am doing a water change as I have always scheduled before adding prodibio The only thing I can suspect is that corals were on frag rack of old tank while I pulled rocks up to put in new tank possibly contaminating water. While I did this I primed water. And coral was only there long enough to allow cube to clear. I'm not suspecting lights but don't want to rule them out |
#2
|
|||||
|
|||||
![]() 60% from the start is high. You need to really tone it down and take your time to raise them to 60%. Ecotech LED's are extremely bright. Light shock will kill your corals in 2 days, where not enough light will kill them in 2 months.
I had 6 x ATI T5 over my tank and when I swapped them our for sunbrite LED's I really took my time to ramp them up. 2 months later they are still at about 50% Here is how slow I acclimated mine... numbers reflect % of red,green,royal blue,blue,white,uv First two weeks 00:00 to 10:00am 0,0,0,0,0,0 10:01am to 1pm - 1,1,29,17,7,4 1:01 to 6:30pm - 6,5,33,28,11,2 6:30 to 9pm - 0,0,8,3,0,0 9:01 to 10pm - 0,0,3,0,0,0 10:01 to 11:59pm - 0,0,0,1,0,0 May 15 raise roughly 10% 00:00 to 10:00am 0,0,0,0,0,0 10:01am to 1pm - 2,2,32,19,8,5 1:01 to 6:30pm - 7,6,37,31,13,3 6:30 to 9pm - 0,0,8,3,2,0 9:01 to 10pm - 0,0,3,2,1,0 10:01 to 11:59pm - 0,0,0,1,0,0 May 21 raise roughly 10% 00:00 to 10:00am 0,0,0,0,0,0 10:01am to 1pm - 3,3,35,21,9,6 1:01 to 6:30pm - 8,7,41,34,14,4 6:30 to 9pm - 0,0,9,4,3,0 9:01 to 10pm - 0,0,3,2,1,0 10:01 to 11:59pm - 0,0,0,1,0,0 June 10 raise roughly 15% 00:00 to 10:00am 0,0,0,0,0,0 10:01am to 1pm - 5,5,40,26,11,7 1:01 to 6:30pm - 10,10,47,40,16,5 6:30 to 9pm - 0,0,9,4,3,0 9:01 to 10pm - 0,0,3,2,1,0 10:01 to 11:59pm - 0,0,0,1,0,0 Today 00:00 to 10:00am 0,0,0,0,0,0 10:01am to 1pm - 5,5,45,46,11,7 1:01 to 6:30pm - 10,10,50,55,16,5 6:30 to 9pm - 0,0,9,4,3,0 9:01 to 10pm - 0,0,3,2,1,0 10:01 to 11:59pm - 0,0,0,1,0,0 thanks Ray |
#3
|
|||||
|
|||||
![]() I'll tone them down now
|
#4
|
|||||
|
|||||
![]() Down to 20%.
Never realized how bright 20% is |
#5
|
|||||
|
|||||
![]() I dont think the issue has anything to do with lighting......the tank is brand new......it doesnt matter if the rock and water came from your tank or not......I started a 25g tank that I plumbed in to my main display, all the water and rock came from the display....the rock literally was only out of the water for about 10 seconds and I still got a big algae bloom in the new tank.......my guess would be unstable conditions are what is causing the tissue loss.....
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694 |
#6
|
|||||
|
|||||
![]() I think your right. I added prime and H2O2. To the water when I filled tank. And added carbon yesterday to rid any contaminates. No invert or fish were affected and only 2 corals out of 20.
I hope to see stable conditions I guess I may see a mini cycle. Last time I upgraded I never had any issues. But maybe I never paid enough attn as I had mostly Lps then |
#7
|
|||||
|
|||||
![]() came home to see my tank is going through its mini cycle glass was gross. cleaned added new skimmer and small water change..
should be good from here on out |