What to dose for calcium ,alk ,etc ??

[MMAX]

Shoot Eli (CaCO3Reef) a pm. He's in C-Town but he's got all the stuff you'll need.

[Reef Supplies]

2-part + Mag dosing is defiantly the way to go ( I personally prefer Kalk via top-off, but that has it's limitations). Since you are a first time user I discourage the DIY route of mixing your own chems. To many errors to make as a first timer.

I would suggest using Brightwell Reef Code A & B liquid for your Cal/Alk needs and Magnesion for your mag. These are all pre-mixed and ready to dose. You can also use EVS 2-part and maf, they make great products as well. Once you dial it all in and understand the chemistry behind it all, then you could consider DIY chems to save a few bucks.

The MOST important thing to remember is to be as consistent and stable as possible. Don't worry too much about raising your levels, worry more about keeping them steady and balanced. The best method to keep things constant is using a QUALITY dosing pump like GHL. It runs for about $400 vs $200 for a lower end pump. The $200 difference is a very small price to pay for piece of mind.

Shoot me an email if you need any more help http://www.reefsupplies.ca/online-st...us&mode=update


thanks,
Ray

[lastlight]

It doesn't get any easier than dosing Bulk Reef Supply 2-part. Even with their expensive shipping that option will be far cheaper than dosing pre-mixed chemicals and last you a very long time depending on your tank size. You simply follow the instructions printed right on the containers. Toss a gallon of ro/di water in a jug, measure 2 cups or whatever they tell you and dump it in with a small powerhead for a bit. Place your doser line in the jug and start with a low daily dose and test until you find how much your tank uses a day =)

I do agree about the profilux. I couldn't live without mine. I have a 3 pump model but only use 2. Strangely my mag level never moves.

[jagermaier]

Another option would be a calcium reactor with a ph controller, once you have it dialed in the only thing you have to maintain is the ph probe for calibration. It made my life a whole lot easier.