![]() |
|
#1
|
||||
|
||||
![]() shouldn't be a problem to do so. i keep mine in the tank year round but its also set pretty cool
|
#2
|
|||||
|
|||||
![]() An extra heater won't make your tank any warmer, and removing one won't make it any cooler.
two heaters will just influence the maximum possible temperature and how fast it can get there. If they're both set to 77 and your tank hits 81 neither heater is doing any work. I'd leave them both in and not worry about it. Also, no discussion of heaters would be complete without a warning to have them on a reliable temperature controller! |
#3
|
|||||
|
|||||
![]() Thanks, makes sense ^^^. No I don't have a controller, will look into one.
|
#4
|
|||||
|
|||||
![]() I think the Ranco brand controllers are supposed to be pretty cost effective if all you want is temperature control.
In my experience, heaters ALWAYS stick to "on", they never fail in the "off" setting. So what I do is I have my controller set to keep the tank at something like 78 f and then set the temperatures on the individual heaters to something like 82f. That way, if the aquarium controller fails and leaves them on, the setting on the actual heaters should stop them from cooking the tank. Just adds a level of redundancy and safety to keep from having the cheapest piece of your setup destroy everything else. |
#6
|
||||
|
||||
![]() +1 I have a small clip on fan and it keeps my tank a good degree or 2 cooler
|
#7
|
|||||
|
|||||
![]() I run a $10 sump fan for cooling, keeps mine 3 degrees cooler.
I keep 4 100 watt heaters in my sump year round controlled with a Reefkeeper.
__________________
Crap happens, that's why they sell toilet paper in 48 roll packs! |