Cuz's 605g system

cuz · #1 03-26-2012, 02:10 AM

1st and probibly toughest problem... getting the damn thing into the house and up onto the stand!!!
The only way it will fit through the doorway is with the front starphire facing down!! booo!! My plan so far is to tip it face down onto a piece of foam (similar to what goes under a tank) then the foam on top of a piece of plywood cut to size. I was thinking if i had 2x4's on end boardering the tank screwed to the plywood/foam it would hold the tank in place on it for the ride down the stairs??
sound do-able?

the tank needs to go through the door and straight down the stairs, from there its only a couple feet to the right and that where it'll sit. I was thinking if I nailed a few pre cut 2x4's to the stairs they would help everything slide down the stairs with minimal lifting by everyone. I remember the last 4 steps of the last time we moved the 300 and they were probibly the roughest part, hopefully the 2x4's eliminate this.

thoughts on my master plan??? lol

cuz · #2 03-26-2012, 02:10 AM

So far in regards to changing salt brands I've been slowley changing it out over the last month. I just didn't see the value in a $100 pail of salt, maybe I'll notice something and go back but for now I kind of like the $40/pail for IO.
I've been changing 5g a day for the past 3 weeks and the last week has been 10g/day. I've seen no difference yet other than really clean water from all the changes!!
I've had to dial back my dosing due to the daily water changes and IO mixing at a higher Alk but every thing seems fine. If i figure everything right by the time I move tanks I'll have added around 450g of new IO mixed water to my current tank and I should be fine filling the new one with just IO salt.
I'm wondering if I should slowly phase my doser out temporarily just to ensure the water from both tanks is as similar as possible for the move??
I'd rather **** off 2-3 pieces from lack of dosing vs chancing ****ing everything off due to different water!!

cuz · #3 03-26-2012, 02:11 AM

I got a little ambition this afternoon and headed to Home depot for the lumber for the new stand.
I pieced everything together for a rough fit so it can all be taken apart in order to fit into the house.

I'm leaving the ledge on the backside (might have to brace it to support my ass!!) Hopefully i can use it to help reach stuff if needed. I plan on drilling a few holes in the middle of it for return and drain plumbing from the overflow once I know where everything lines up..the plywood against the wall will be on the bottom of the stand.

And here's my afternoons work diss-assembled ready to be moved...

Casey8 · #4 03-26-2012, 02:23 AM

WOW 470G ... Can't wait to see what kind of fish you are going to put in there. I only have a chance to see untamed's 500G tank in his Burnaby house one time, and loved it !

fishytime · #5 03-27-2012, 02:51 AM

dude!......didnt you just upgrade like a year ago?

.......I heard the gossip about this tank around the water trough......sound like a beast.....should be some cool new digs for that whateveryoucallit tang!

cuz · #6 03-27-2012, 03:26 AM

Quote:

Originally Posted by fishytime

dude!......didnt you just upgrade like a year ago?

.......I heard the gossip about this tank around the water trough......sound like a beast.....should be some cool new digs for that whateveryoucallit tang!

Lol ya the 300 is almost a year and a half old now!
Funny thing is it wasn't my idea!! The Mrs. wanted to buy a new house and baited me with a new tank!! I'm sure you can relate!! hahaha

fishytime · #7 03-27-2012, 03:50 AM

Quote:

Originally Posted by cuz

Lol ya the 300 is almost a year and a half old now!
Funny thing is it wasn't my idea!! The Mrs. wanted to buy a new house and baited me with a new tank!! I'm sure you can relate!! hahaha

I can indeed relate.....hook, line and sinker

......that's one to hold to man.....I like her kind of negotiating!