Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Reef

Reply
 
Thread Tools Display Modes
  #1  
Old 03-23-2012, 04:41 PM
daniella3d's Avatar
daniella3d daniella3d is offline
Member
 
Join Date: Jun 2010
Location: longueuil, quebec
Posts: 1,979
daniella3d is on a distinguished road
Default

shut down the pump so there is no current, make the clam close and then put some aiptasiaX on the aiptasia. Don't put the current back right away, just give it a few minutes. That's what I do for mine. I tried scraping it off but part of it remained on the shell and returned. My clam has a lot of sponge covering its shell, so there is room for aiptasia to hide.


Quote:
Originally Posted by MMAX View Post
I've never had a problem with aiptasia, don't have a single one in my tank until now. Found a tiny one on the shell of a 2" maxima clam I added a couple of weeks ago. It's in a bad place, seems like when the clam closes it takes the aiptasia with it. Looks like it's probably on the shell but right close to the mantle. How do I get kill of this thing without harming the clam?
__________________
_________________________
More fish die from human stupidity than any other disease...

Last edited by daniella3d; 03-23-2012 at 04:44 PM.
Reply With Quote
  #2  
Old 03-23-2012, 06:13 PM
whatcaneyedo's Avatar
whatcaneyedo whatcaneyedo is offline
Member
 
Join Date: Apr 2007
Location: Prince George, BC
Posts: 2,198
whatcaneyedo is on a distinguished road
Send a message via MSN to whatcaneyedo
Default

I always just remove the clam from the tank in a bucket of aquarium water then scrub or scrap off any aptasia or majano that I see with a tooth brush or blade. Afterwards I return the clam to the tank and discard the bucket of water. There were 5 or more aptasia on the derasa that I picked up from BWA but at least with a large smooth shell they were easy to get at. I've also left the clam in a QT tank for now so that I can wait and see if anymore pop up.
__________________
"We shall dive down through black abysses... and in that lair of the Deep Ones we shall dwell amidst wonder and glory forever." - H.P. Lovecraft

Old 120gal Tank Journal
New 225gal Tank Journal
May 2010 TOTM
The 10th Annual Prince George Reef Tank Tour
Reply With Quote
  #3  
Old 03-23-2012, 06:45 PM
monocus monocus is offline
Member
 
Join Date: Jan 2010
Location: burnaby
Posts: 1,024
monocus is on a distinguished road
Default aptasia

scraping or cutting any aptasia is a great way to spread the pests.that's how i propagate my aptasia for my berghia.the best thing is to inject it with lemon juice,and then cover the base with a kalkwasser paste with the power heads off.do this in the daytime about 2 hours after feeding not at night
Reply With Quote
  #4  
Old 03-23-2012, 07:23 PM
MMAX's Avatar
MMAX MMAX is offline
Member
 
Join Date: Feb 2008
Location: Innisfail, Alberta
Posts: 748
MMAX is on a distinguished road
Default

Quote:
Originally Posted by whatcaneyedo View Post
I always just remove the clam from the tank in a bucket of aquarium water then scrub or scrap off any aptasia or majano that I see with a tooth brush or blade. Afterwards I return the clam to the tank and discard the bucket of water. There were 5 or more aptasia on the derasa that I picked up from BWA but at least with a large smooth shell they were easy to get at. I've also left the clam in a QT tank for now so that I can wait and see if anymore pop up.
This sounds like my best bet.
Reply With Quote
  #5  
Old 03-24-2012, 03:21 AM
MMAX's Avatar
MMAX MMAX is offline
Member
 
Join Date: Feb 2008
Location: Innisfail, Alberta
Posts: 748
MMAX is on a distinguished road
Default

Looks like I may have gotten the little b*stard. Scraped him with the tip of a utility knife blade gave it a quick brush and back into the tank. Lets just say the clam isn't too happy with me right now.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 02:54 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.