|
|
|
|
|
#1
03-06-2012, 10:55 PM
|
|||||
|
|||||
Thats cool!! are they looking for any testers?
__________________
Feed the bear goodies, make a new friend, don't feed the bear............... 8' - 165gal Reef DIY LED's Build 2012 Nano Contest Winner Febuary 2013 POTM Winner 300 gal + 60 gal Complete DIY Build |
|
#2
03-06-2012, 10:58 PM
|
|||||
|
|||||
|
only if you are willing to jam your pump while 3,000 miles away and making sure you can log on and turn on your backup
 Yes it can do that |
|
#3
03-07-2012, 12:13 PM
|
|||||
|
|||||
|
OK so here are the prices
Low flow $139.00 High flow $159.00 For a high quality low maintenance German built industrial flow sensor, and with the high importance of now having control over a pump gone bad, this is fantastic value from GHL We will also be including for free for a limited time this part in all ultimate kits purchased for one month when the product releases in April! email us at sales@aqua-digital.com for more info |
|
#4
03-17-2012, 02:09 PM
|
|||||
|
|||||
|
After seeing a huge demand GH has added another flow sensor to the product line - now up to 9000 l/h can be measured without a bypass!
 More safety with the new Flow Sensors for ProfiLux! GHL offers now a flow sensor which can be connected to the ProfiLux aquarium and pond controller, with this sensor the flow can be measured and observed permanently. ProfiLux can display the actual measured flow and warn with an acoustic signal, or by sending a SMS or an email, when the flow falls below a preset value. If wished ProfiLux can switch devices on or off in case of a flow alarm. The sensors are connected at the level ports of the ProfiLux. The flow sensors work extremily reliable and need not much maintenance because they work without dirt-sensitive moving parts like winged wheels. Two different sensors are available: •Flow 100 - 2000 l/h, nominal width DN10, 2x G1/2" outside thread, •Flow 300 - 5000 l/h, nominal width DN20, 2x G1" outside thread, •Flow 540 - 9000 l/h, nominal width DN25, 2x G1 1/4" outside thread, *** now even larger measurement range *** We recommend to use a bypass for higher flows. Shipment incl. 2m cable Mini-DIN<->M12 to connect the sensor with the ProfiLux. Please note: The sensors are shipped without adapters for hoses or tubes. These new products are available from April 2012 on |
|
#5
03-17-2012, 02:53 PM
|
|||||
|
|||||
|
NEW Also!
Expansion cards for level inputs Two new expansion cards to increase the amount of level inputs: PLM-4Level: 2 ports with 4 level inputs in sum PLM-pH/Redox-2Level: one port with 2 level inputs + universal input pH or Redox (adjustable) Shipping starts in approx. 6 - 8 weeks |
Hybrid Mode
