Radion vs. AI Sol

[sphelps]

Originally Posted by Aquattro

What I would like is to hear from people running the AI, utilizing 1 unit per 2sq ft, and whether they feel it's enough, or not. Since PAR is apparently far greater on these than the Radion, then raising them higher allows for great spread, while maintaining decent PAR. Right?

The way I look at it is this, Radions basically don't use optics while sols do hence the reason why radions get better spread but less par. In terms of power they are pretty close:

Radions:
24W Blue
30W R-Blue
40W White

Sol Blue:
24W Blue
24W R-Blue
24W White

The major difference is the Radion has more white but, while this will come down to personal preference, most run LEDs at about a 2 blue/rb to 1 white ratio. So the extra white on the Radions are not really much of an advantage.

So that said in a real life example the two are pretty much matched in power and in theory lifting the sols higher should produce similar spread and par as the Radion, especially if all the optics are switched to 70 degrees.