LF Inventronics 150Watt Dimmable Driver Edmonton

[eli@fijireefrock.com]

Originally Posted by reefme

inventronics-700ma-96w-driver good for 24 to 44 LEDs at 3W each. But mine is 25 0f 6W each?

I could try and help you out, do you have any information on the type, model number or maybe where you bought your 6w LEDs

[reefme]

Originally Posted by Elias@caco3reef.com

I could try and help you out, do you have any information on the type, model number or maybe where you bought your 6w LEDs

Bought it at Aquatopusa. It is a LED light fixture.

[reefme]

Here is the link for a fixture i bought:

http://www.aquatopled.com/mm5/mercha...t_Code=AQ300W0

[reefme]

Hi Martin,

Can I go with 2 of these:

http://www.modularled.ca/inventronic...a-120w-driver/

[eli@fijireefrock.com]

From doing a quick reading (aquatopled, Bridgelux and Epistar)
your array is running at 50% of its capacity I wouldn't suggest running it hygher as I am not to sure about Bridgelux and Epistar LEDs.
So to say your leds are rated at 6w but in actual running at 600 to 700ma
That said I think what Martin is offering is good for your array.

[reefme]

Originally Posted by Elias@caco3reef.com

From doing a quick reading (aquatopled, Bridgelux and Epistar)
your array is running at 50% of its capacity I wouldn't suggest running it hygher as I am not to sure about Bridgelux and Epistar LEDs.
So to say your leds are rated at 6w but in actual running at 600 to 700ma
That said I think what Martin is offering is good for your array.

Ya I just want to make sure 96W is enough or should I get the 120W

[The Grizz]

Personally if it was me I would get the 120w just to be on the safe side.