Greg's 75g

[gregzz4]

Originally Posted by SeaHorse_Fanatic

I run two heaters on my 165g. Not sure why so many heaters are in your sump. That's waaaaay overkill.

There is redundancy here, yes, but I'm not running them all, just the 200 watters.
The 2 x 250w heaters are backups on a Ranco, just in case the main heater circuit craps out due to either a Reefkeeper failure, or a Heater failure tripping the GFCI.
As for the 3 x 200w heaters; I prefer smaller heaters rather than large ones that can go haywire and cook things. I feel 3 x 150w just wouldn't cut it as it can sometimes hit 68F in our Livingroom.

[gregzz4]

Just ordered the Reefkeeper Elite, some switches and a Hub. I received a decent offer from a member for used, but for the cost difference, new it is.
Time to get some more plumbing done.

[Nano]

cant wait to see more pics!

[gregzz4]

OK, more pics, but only 'cause you asked
I wasted half my night on the phone with 2 members ... 2 1/2 hours talkin' 'bout reef stuff. Not that there is anything wrong with that, but, trying to be polite while doin' plumbing is difficult.
So ... here is what I got done tonight.
And because we can't edit our posts, I have to post new pics of where I'm at;

I re-arranged the drain plumbing under the tank. I still want to brace the main drain line to alleviate any stress from the bulkhead while I'm crankin' the valve. Only issue is I haven't found a chunk of something to stuff in there yet (see second pic to understand space between pipes and wood).



I got the lines run to the sump ( on the right you see my SW holding tank with it's outlet valve )


I had to re-arrange the heaters as the drain lines interfered with their locations, so this is where we're at now


It's kinda hard to see in the last pic, but that's my skimmer stand. It's reflecting off the back glass.
The wife used to work with stained glass, so I used her glass grinder to round out the upper corners of the gussets to let the bubbles out.
Maybe tomorrow I'll get enough done to glue the pipes and do a water test.
I still have to plumb the DT pump before that happens. After that there is the Sump pump with it's circuit of 2 x reactors, UV/Chiller and Chaeto.

[Nano]

Looking good dude! I see what you mean with the heaters can never be too careful

[Seriak]

Keep those pictures coming. I love how everything is setup up so cleanly. Great work. Gives me plenty of ideas for my tank.

[gregzz4]

Thanks guys.
Since the rock is still cooking, I'm being overly fussy. I think I spent 2 hours just on the drains under the tank