advice with reef keeper lite software

[Cal_stir]

start MYREEF, the home page will come up, then plug the SID only into your computer, in the left hand column the SID will be displayed, click on it , the SID info will be displayed on the main page, it should say version 2.08 of 2.08, if not, you need to update it. Then plug each module, 1 at a time into the SID, the module will show up under the SID, if it needs to be updated it will be red, if so, update it, and so on with the other modules.
Then connect all modules with the buss cables, turn on the power bars and it should work.