How do I set a Cpr Aeroforce skimmer?

[sumpfinfishe]

Ryan you want the waterline to be at the bottom of the throat of the skimmer,
this will give you a steady stream of bubbles in the riser tube to the top of the
collection cup. However by the sounds of things this is a new skimmer so it will
prob need a few days or a week to break-in which means get dirty. You will
need to adjust once your skimmer gets broken in usually by turning a valve to
raise the air flow or water height. Dont worry too much about performance until
your skimmer is broken-in, then simply adjust it so its producing dryer bubbles
which will give you a green or brown liquid in the cup, if the liquid is clear then
the skimmer is skimming too wet an thus you need to increase air flow or reduce
the water height in the neck of the skimmer.