Wavebox, good or bad? - Page 4

StirCrazy · #31 12-25-2011, 03:04 AM

Quote:

Originally Posted by Aquattro

Tony, there doesn't appear to be any movement at all, so not as worried as I was yesterday. My overflow is a foot long, centered on the back wall, so it's working perfectly. The wave is more a meet in the middle rather than end to end wave.
Problem now, the Tunze keeps squeaking randomly....

did you build the stand?

Steve

Casey8 · #32 12-25-2011, 03:18 AM

Quote:

Originally Posted by StirCrazy

did you build the stand?

Steve

Don't scare him, or he will be tearing his tank apart to put the new stand in before New Year.

Aquattro · #33 12-25-2011, 04:04 AM

Quote:

Originally Posted by KevinK

brad, i have a old clip for the 6105, if you need it, i have no use for it

Thanks Kevin, but it's the pump housing, not the clip. I bought new ones last year, and they work ok, but with the thrashing of the new profile, they don't hold.

Aquattro · #34 12-25-2011, 04:04 AM

Quote:

Originally Posted by StirCrazy

did you build the stand?

Steve

Do you have a tank yet??

StirCrazy · #35 12-25-2011, 05:17 AM

Quote:

Originally Posted by Aquattro

Do you have a tank yet??

I have three tanks, make that 4.. now answer the question

for the record I don't like the idea of water sloshing back and forth in a tank. if you figure 1 gal of salt water weighs about 9lbs plus the kentitic energy it has in its motion, thats a lot of cycling force in the tank and a cycling force will destroy things faster than a constant force.

Steve

Delphinus · #36 12-25-2011, 05:18 AM

Quote:

Originally Posted by Aquattro

Problem now, the Tunze keeps squeaking randomly....

Driver alarm? Or propeller friction?

I have two spare propellers - magnet, bushing, propellers and even the little orange o-ring - from old streams I don't have anymore (well, I have one 6080 for mixing SW). I can put one or both in the mail if you want ..

StirCrazy · #37 12-25-2011, 05:20 AM

Quote:

Originally Posted by Casey8

Don't scare him, or he will be tearing his tank apart to put the new stand in before New Year.

naa were probably safe no wires involved in building a stand

Steve

Aquattro · #38 12-25-2011, 05:27 AM

Quote:

Originally Posted by Delphinus

Driver alarm? Or propeller friction?

I have two spare propellers - magnet, bushing, propellers and even the little orange o-ring - from old streams I don't have anymore (well, I have one 6080 for mixing SW). I can put one or both in the mail if you want ..

It's driver alarm, almost. Just starts squeaking, then stops. Over and over. Pump is running fine, took it apart to see if it needed cleaning, but nothing in there is dirty. Dunno, might be time to replace the old pumps

Parker · #39 12-25-2011, 05:49 AM

Got one in my 265, love it. If the tank breaks I'm calling my insurance company and they can buy me a new one.

Delphinus · #40 12-25-2011, 05:55 AM

I had this problem. Darn it, now I don't remember what the problem was though. Have you read through this thread yet over at RC? http://reefcentral.com/forums/showthread.php?t=1071516&

I think I ended up having to retire the most troublesome stream which is how I ended up with one of the spare propellers. The other spare propeller came from my other 6080 which was mounted on a wavysea and the back and forth movement caused the powercord to rub its insulation off the wire. The propellers from the two units look identical.