![]() |
|
#1
|
|||||
|
|||||
![]() Quote:
![]() In all fairness the one I came close to ordering was about $80 from uline.ca. It was the dolly at $60 that was the luxurious touch that maybe one could do without. The lid too is around $30. http://www.uline.ca/Product/Detail/H...ootChecked=yes I've checked other online suppliers (usplastic.com & a few others) but the pricing is all pretty much inline with each other. I wish I knew someone in the L.M. well enough to ask for the huge favour of just picking one of these up for me and holding it until I came through on my island camping trip but seeing as that's the summer that's kind of too big a favour to ask anyhow. ![]() ![]() cheers
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |
#2
|
|||||
|
|||||
![]() Quote:
If you're a bit handy you should be able to DIY a dolly with some casters from a hardware store and a bit of lumber.
__________________
Mike 77g sumpless SW DIY 10 watt multi-chip LED build ![]() |
#3
|
|||||
|
|||||
![]() http://www.princessauto.com/pal/prod...s/Barrel-Dolly
I bought one of these last year for stacking our window-mount A/C units for storage through the winter. Just makes it easy to move them around. The dolly was only $25, give or take. The uniseal bulkheads are making me nervous. Thats a lot of water to hold back with a press-fit seal. Think I'll do some research about mounting one down low. |
#4
|
|||||
|
|||||
![]() Quote:
Just go by his place on your way through as he's only about 15mins off the freeway on the west side of the Port Mann Bridge BTW, if I had enough space, I'd store one for you ![]() |
#5
|
|||||
|
|||||
![]() Thanks for the definition Mike! I really had no idea that "bung" was a word. Now I understand what Beavis & Butthead were talking about when they called each other "bungholes".
![]() |
#6
|
|||||
|
|||||
![]() Also brings to mind the saying 'bunged up'. But it's probably best not to elaborate too much on that!! Not sure bung is actually an appropriate term for the plastic barrels since the caps are threaded & if I'm not mistaken a true bung is a friction fit such as in traditional wooden kegs or wine barrels, hammered in & forcibly removed. Egad, I think I'm opening a bungless can of worms here! Faintly recall some old joke about a constipated elephant & a poor little guy who decided to remove the 'bung'.
__________________
Mike 77g sumpless SW DIY 10 watt multi-chip LED build ![]() |