Radion owners speak up..

cale262 · #1 11-09-2011, 12:41 PM

Quote:

Originally Posted by tidal_waters

I had this same problem, what you need to do is when you are Programming ensure that you click on the "group" tab on the left where both of your units are listed. I was accidentally programming both lights to do two different things before I figured out what was going on.

kewl, I'll make sure I check that tonight

Aqua-Digital · #2 11-09-2011, 02:11 PM

Make sure you download R3 software now available and also as above check your grouping seems you are running them independantly.

Parker · #3 11-09-2011, 02:38 PM

How far above a 30" tank can the lights be mounted and still remain effective to the bottom of the tank?

Aqua-Digital · #4 11-09-2011, 02:43 PM

depends on the depth of the tank, the recommendation is 8" above for a 24" tank surface area.

If you dont have SPS on the floor then you can see how one goes.

cale262 · #5 11-09-2011, 02:55 PM

Quote:

Originally Posted by Aqua-Digital

Make sure you download R3 software now available and also as above check your grouping seems you are running them independantly.

I've been using 1.3 since it was released on Nov.4th and I'll check the grouping tonight...