290G Peninsula Tank

kien · #1 10-27-2011, 09:07 PM

Quote:

Originally Posted by mseepman

Well today was a disaster. We had our variance meeting to discuss the couple of inches that our back corner was too close to the property line and after hearing from several hot headed neighbors, the city told us to start over.

Now I am left the monumental task of either ripping out the entire basement or finding a way to cut out the couple of inches we need. This sounds easy but I designed the house and everything was fit exactly the way it had to be...I had no excess anywhere. On top of that, we have no real access on the side that would need to be cut out...neighbor has put in a rock wall right there.

It's just not my day today.

for 2 freaking inches??? WTF?? Geez that's terrible that people can't cut you some slack for 2 freaking inches!

mseepman · #2 10-27-2011, 09:31 PM

Funny thing is we have huge setbacks compared to places like Calgary. Over 8' on each property...what is it in Calgary now 8' total?

mseepman · #3 10-27-2011, 09:50 PM

Quote:

Originally Posted by kien

for 2 freaking inches??? WTF?? Geez that's terrible that people can't cut you some slack for 2 freaking inches!

I guess to be fair, it is only a couple of inches at the front of the house, but almost 5 at the back right corner.

asylumdown · #4 10-29-2011, 05:48 PM

Man that really sucks. Do you have any recourse with the survey company? We are facing that exact issue with out house right now, the surveyors were almost an entire foot off in height in the backyard so now the grade level retaining walls back there are all too high. We just got the letter from the city inspector last week, so I'm still crapping my pants a little.

mseepman · #5 10-29-2011, 06:50 PM

Quote:

Originally Posted by asylumdown

Man that really sucks. Do you have any recourse with the survey company? We are facing that exact issue with out house right now, the surveyors were almost an entire foot off in height in the backyard so now the grade level retaining walls back there are all too high. We just got the letter from the city inspector last week, so I'm still crapping my pants a little.

Unfortunately, no recourse. The city approved the original developers plans and so they don't even want to talk about how they were not right. Part of this whole thing may be the city covering their butts for not double checking things in the beginning. The City of Vernon is pretty corrupt. My brother built a new house in an older neighborhood. There were no sidewalks at all on the street. The city said he had to build a side walk in front of his house only (can you imagine how stupid that would be) but could get out of it if he "gifted" them a couple grand. Corruption!

mseepman · #6 10-29-2011, 06:53 PM

So, worked the evening until midnight on getting these little LED's down.

Progress was slow...

Hard to believe how many of these little buggers there are:

Glad to be starting the next phase of wiring. Still waiting on my two bigger fans and on the drivers. Will also be doing a moonlight setup on here too. I haven't yet made my order from digikey.ca on the resitors and fuses but will do that this weekend.

riceboy · #7 10-29-2011, 10:22 PM

Quote:

Originally Posted by asylumdown

Man that really sucks. Do you have any recourse with the survey company? We are facing that exact issue with out house right now, the surveyors were almost an entire foot off in height in the backyard so now the grade level retaining walls back there are all too high. We just got the letter from the city inspector last week, so I'm still crapping my pants a little.

Is this a brand new neighborhood?

mseepman · #8 11-04-2011, 05:07 PM

Well, time to add the lastest steps in my LED build.

One of the challenges of doing U-Channel was how to cool it (if it needed it). I don't know that I will require cooling but I've planned for it none the less. The clusters of LED's on the large 4" channel will build the most heat and so I've put double the fans in there.

It was a real bugger to figure out how to attach the fans...finally found this PVC channel that I could cut down and screw to the aluminum to provide some real surface for the fans to screw down to. Not uber pretty...but no-one will see that part of the light anyways.

Then I had the challenge of not wanting too much noise. The 6 smaller channels are spread out so I only wanted one fan to cover each side group. Found this 22cm fan at Newegg...covers the whole area and will blow through the gaps to gently cool the area between the splash guard and the Lenses. These fans push over 100cfm and are dead silent.

You can vaguely see the fan here.

All of the fans will be controlled by a 5 channel fan controller. My plans are to mount the separate drivers into a PC box as decent sized project boxes are hard to come by in Canada. This will allow me to mount the fan controller as well and it should look cool.

Tonight I will start to run the wiring between the LED's.

sphelps · #9 11-04-2011, 05:13 PM

Too bad about the variance, I know what it's like as I had a similar issue with my house which ended up being over only 2cm! We ended up settling a deal with the neighbor to buy 2cm of land of them which fixed the issue... Not sure if that's an option for you but perhaps worth looking into.

mseepman · #10 11-04-2011, 05:42 PM

Yeah, we've looked into it...but after the city kept us waiting over 6 months with a partial build, the neighbors are ****ed and won't entertain the discussion.