Abs. Vs PVC

[sphelps]

Originally Posted by lastlight

speaking of transitions I think the common bulkheads we use are abs material. I've only ever used reg pvc primer and glue on these is there actually a more ideal way?

You can get ABS to PVC transition cement, even HD sells it. More of a concern With standard ABS fittings on PVC pipe as the surface contact is small, with the bulkheads the pipe goes in far enough and fits tight enough where regular PVC cement still makes a permanent bond.

[Cal_stir]

you can get a combo cement that works for both, C11 i believe, it works very fast so you must get things lined up quick

[Bryan]

The solvent that you would use to glue for acrylic will also work for ABS.