![]() |
|
#1
|
|||||
|
|||||
![]() yes, the tank will need to readjust to bioload, i've been there and 6 to 8 weeks is a long time, it will seem like an eternity, but you must stick it out, good luck
__________________
Crap happens, that's why they sell toilet paper in 48 roll packs! |
#2
|
|||||
|
|||||
![]() Bad start, both my baby clowns have died within a couple of hours.
Pulling hair out now..... |
#3
|
|||||
|
|||||
![]() What type of copper did you put in there? Also did you check for ammonia? this is a reason I like to use hyposalinity to cure ich (if it was really ich) as you can have liverock and that's a good way to avoid ammonia buildup. With copper, you can't have anything and you cannot put any dechlorinator to neutralize copper if you are using Cupramine.
So the only way to remove deadly ammonia is to do water change and then mesure copper again and redose accordingly. Ammonia can build up really fast in a small tank loaded with fish and it is very deadly at high PH. Copper is toxic as well to the fish. |
#4
|
|||||
|
|||||
![]() I checked the ammonia after they died, it was at 0.25 but I wasn't sure if the copper was giving it a false reading. I'm using cupramine, there is nothing else in the tank. I will get a water change ready today, will pick up an airstone as well. I have to find a seachem copper test as well, we have the API test. Others look ok this morning, going to feed them and see how they respond.
|
#5
|
|||||
|
|||||
![]() Sorry for the loss of the clowns
![]() |
#6
|
||||
|
||||
![]() i would think the clowns were to stressed for the treatment, hope its going well ,coppers a tricky process.good luck
__________________
........ |
#7
|
|||||
|
|||||
![]() Everyone else seems ok for now. Checked the copper tonight, it's at .03 so I don't think I overdosed the tank, was probably stress. I noticed the ich on them first and maybe they were worse than I thought. Hope this is the worst of it.
|