Reef Scaping Advice Needed

[reefwars]

zip ties buddy and acrylic rod with epoxy is better than pvc plus half inch is large holes to be drilling unless the rock is huge

[BlueTang<3]

Wayne

Go to sabic polymere shapes and buy a piece of 3/8 acrylic rod and use that. I drilled with a masonry 3/8 bit i got from canadian tire for like 5 bucks. Use discretion on how far to drill. Once your happy use kz speed glue to hold it together.

[Myka]

What Wes said...be prepared to spend a whole dang day doing it too. Ugh..

[The Codfather]

Originally Posted by BlueTang<3

Wayne

Go to sabic polymere shapes and buy a piece of 3/8 acrylic rod and use that. I drilled with a masonry 3/8 bit i got from canadian tire for like 5 bucks. Use discretion on how far to drill. Once your happy use kz speed glue to hold it together.

And while your at it, invite a friend over to "give you a hand for a second" then it only takes half the time.

[Mechaninano]

Originally Posted by The Codfather

And while your at it, invite a friend over to "give you a hand for a second" then it only takes half the time.

I didnt know you were related to my brother

[BlueTang<3]

Originally Posted by The Codfather

And while your at it, invite a friend over to "give you a hand for a second" then it only takes half the time.

Yes but don't add your sand half way through doing it cause it makes it hard to see the tank.

[The Codfather]

Originally Posted by BlueTang<3

Yes but don't add your sand half way through doing it cause it makes it hard to see the tank.

Hey, lets try to keep this thread on track.
make one little mistake, and you never live it down

[Parker]

PVC and zip ties is what I used. I like the way it turned out.

[jimbo222]