DIY: from scratch.

[Beano1169]

Thanks Ill try that out asap, also does anyone out there have a build thread I could see for where I should drill and How large I shouldd go for the bulk heads. This is my first time building my own tank so I dont want to mess up haha .

[monocus]

if you look through those sites they should have that info-also try melv's reef

[tidal_waters]

Sorry if i misunderstood your post, but if your planning on drilling holes in your tank you'll want to stay away from tempered glass.

[Beano1169]

It plans on being drilled then tempered. And I found out I need around 10mm thick glass for an aquarium 24" tall x 36.4" long.

[Edmonton newbie]

show us some pics of the file cabnet so we can see what we are dealing with as far as extra bracing ect.

[Beano1169]

ok can do Ill get them posted asap

[parkinsn]

You don't need to have tempered glass if you build you euro brace appropriately. Another option would be to have your holes drilled by whoever you buy your glass from. This way you don't risk breaking a piece while drilling and have to by a new one.