|
|
|
|
|
#1
08-10-2011, 11:31 PM
|
|||||
|
|||||
I skimmed through this whole thread again and I didnt see it anywhere.....what are the dimensions on this bad boy?
I noticed in the picture of beneath the tank that it looks like there was a small concrete "footing" for the cross braces on the stand? .....looks like its starting to crumble if thats what Im seeing???
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694 
|
|
#2
08-11-2011, 04:21 AM
|
||||
|
||||
|
Quote:
 It's 16' long on the long side, and 8' long on the "short" side x 36" wide x 30" high. If it was a public display, I would have gone 36" high for impact, but the aquascaping and coral placing would suffer.No crumbling, the cement was just packed by hand and not formed. The tank wasn't properly leveled, so it is off in all corners. As a result, the overflow at th elong end does most of the draining (70%). I intend to raise the lower overflow teeth with a strip of acrylic... some day. The teeth are too big as well. I think ATM designed it like their usual fish only tanks. Last edited by mr.wilson; 08-11-2011 at 04:26 AM.
|
Hybrid Mode
