![]() |
|
#1
|
|||||
|
|||||
![]() wow, it looks good! looking forward to see what it looks like on!
|
#2
|
||||
|
||||
![]() I have one last string of CW and NW to wire up and test before I put on my optics and Super Corona Dope everything.
I tested the RB and the CW and all was perfect except one LED that had the bulb gone. Defective or blew up not sure. LOL Anyways here is the fixture with the lights lit up. I have them dimmable but this setting was set to the lowest setting possible. Way too bright. ![]() http://www.dropbox.com/gallery/29981...BUILD?h=77ee11 enjoy thanks erick |
#3
|
|||||
|
|||||
![]() Ive been following this for a while now, all I can say is wow. I was considering starting one myself, but electronics has never been my strong point. You'll have to keep us informed on your results.
Bob
__________________
There's plenty of room for all God's creatures. Right next to the mashed potatoes. |
#4
|
||||
|
||||
![]() It's pretty simple just time consuming. I can help you out if you got questions.
thanks erick |
#5
|
||||
|
||||
![]() I finished all the wiring and epoxying the optics. Super super super bright. :O Now I will just put a couple coatings of Super Corona Dope to prevent Tracking and Finish up the driver wiring and hopefully can have her up and running in the tank soon. I will keep you guys posted.
![]() thanks erick |
#6
|
||||
|
||||
![]() I finally got my canopy attached to the LEDs I will finish it up in 2 weeks. I'm away for work for atleast 2 weeks and can't work on it.
![]() I am still trying to figure out the best way to mount the canopy. Very Very Heavy (150 lbs) I still have to finalize the final wiring and the LOW RPM fans but other than that I should finish everything in a weekend. I hope. Take a look and let me know if you got any questions http://www.dropbox.com/gallery/29981...BUILD?h=77ee11 thanks erick |
#7
|
|||||
|
|||||
![]() Very nice job. You could probably light a small stadium with that!
|