straight pin to square pin (adapter) for 2- 65w PC bulbs - end cap swap

BlazingArrow · #1 05-10-2011, 10:11 PM

Swapped over the end cap from Square to Straight. Did a little research and the two middle pins are the grounds. So after figuring out the wiring, turned it on and ta-da! Presto change-o square to straight.
Have UVI 454 and Super Actinic installed now. Pretty happy with the change. Although the 454 is quite blue...will see how I like it with time.

ScubaSteve · #2 05-10-2011, 10:40 PM

Show us!

Snaz · #3 05-11-2011, 05:32 AM

Quote:

Originally Posted by BlazingArrow

Swapped over the end cap from Square to Straight. Did a little research and the two middle pins are the grounds. So after figuring out the wiring, turned it on and ta-da! Presto change-o square to straight.
Have UVI 454 and Super Actinic installed now. Pretty happy with the change. Although the 454 is quite blue...will see how I like it with time.

I would be really interested in this. My AquaPod bulbs are really hard to find now and there are lots of straight pin bulbs I could use instead. I need to convert straight to square. Thank you.