|
|
|
|
|
#1
04-30-2011, 04:13 PM
|
||||
|
||||
Quote:
__________________
150DD mix reef with 90 gal sump and 40gal frag tank purple tang, sohal tang, yellow eye kole tang, fairy wrasse. cleaner wrasse, leopard wrasse, and misc fish. GHL Mitras 6200HV X 2, MP40 X 2, MP60 X 1, tunze 6095 X 2, Vertex RX6 calcium reactor, Bubble King SM250, Aquamaxx bio pellets reactor, Profilux 3 
|
|
#2
04-30-2011, 05:21 PM
|
|||||
|
|||||
|
This is what I've seen before. Weldon and nylon bolts.
http://www.thereeftank.com/forums/sh...3&postcount=10 http://www.reefcentral.com/forums/sh...25&postcount=6 Last edited by Samw; 05-01-2011 at 05:19 AM.
|
|
#3
04-30-2011, 08:12 PM
|
|||||
|
|||||
|
Wouldn't you know it. I went and had a piece of glass cut to fit. Came home to replace the plexiglass so I had to cut off last of the black plastic brace. One end wouldn't come apart and the other end only released after applying a lot of pressure. So I finished the trimming, added more epoxy, clamped it together. Went to it this morning and it is bonded. I have the glass as a backup if it fails, but maybe I got lucky and have solved this problem.
As for the two links, I was kinda wondering what fastening device would work in this environment. Nylon screws would be perfect. Thanks for all the good advise and ideas, If there are any changes I will report them...
__________________
Mike 36 Gallon Saltwater http://www.canreef.com/vbulletin/showthread.php?t=72283 90 Gallon Slow Build http://www.canreef.com/vbulletin/showthread.php?t=82824
|
Hybrid Mode
