|
|
|
|
|
#1
02-21-2011, 05:48 PM
|
|||||
|
|||||
Unfotunatly I am in a small condo so I have a water jug under the sink which I use for my top offs... I don't really want to invest in a more permanent water container because I only plan on living here for another year or so.
When I am in a house I think a setup much like yours would be sweet  
|
|
#2
02-21-2011, 05:57 PM
|
|||||
|
|||||
|
Been a long while since I lurked onto here!
Just last night I built a new setup for turning off my RO/DI I used an irrigation valve (12v), a standard electric float switch, 12v/15a relay, 12v wall wart, and a 'hang on tank' pump mount that came with a rio pump at some point in time. Only trouble was buying the proper sized bushing to reduce the 3/4" irrigation valve down to 1/4" fittings. If you want some pics of my setup to better understand, just ask 
__________________
28g Nano Cube drilled with 13g sump in stock stand. Vertex IN80 Skimmer, Phosban 150 Reactor, Apex Controller, DIY LED with stock hood, dimmable Established March 2006
|
|
#4
02-21-2011, 06:11 PM
|
|||||
|
|||||
|
You could install the float valve in your bucket and use a John Guest valve and fittings so you can just unplug it, pour your water out then plug it back in.
__________________
Brian ____________________________________________ 220g inwall 48"x36"x30" 110g mangrove refug/sump Poison Dart Frog Vivarium
|
Hybrid Mode
